Wardrobe
Products Wardrobe

Wardrobe, Workbox, & Production Cases

The C-Style is versatile case, offering endless variations including hanger bars, drawers, compartments, pop-tops for printers, and shelves. The cases are most commonly referred to as wardrobe cases and workboxes, productions cases and other names that refer to the user’s profession.

Wardrobes come in singles and doubles, with standard carpet lining and vents. Many wardrobes have compartments or drawers added. Standard sizes conform to truck pack, are dimensioned to fit below deck for air cargo, and fit sea containers.

Worbox configurations are even more varied: in a single style the lid can have compartments for small storage or the lid can be lift-off with banquet legs to make a table. If an extra top lid is added it can pop up to allow access to a printer or other equipment above the drawers. Built-in monitors are a common accessory along with built-in power. Consult with your designer.

These cases can be double, hinged or split apart for greater flexibility. In this configuration, a single production office can be made to fit truck pack and work as a single case or stationed stage left/right for production needs. Production cases can add a hanging bar just large enough for a suit jacket. The possibilities are endless.

Jan-Al Cases has been deeply committed to reducing our environmental footprint by using water based coatings, green construction products & examining manufacturing capture of the products we use in our cases. We encourage our customers to be climate kind. 

View C-Style Cases

C-Syle (Wardrobe)

Standard 

  • Plywood: 3/8”, ½” based on touring conditions and payload
  • Laminate Colors: black, blue, white, red, orange, white, gray, and many others
  • Laminates: ABS, Rhino Hyde, Fiberglass

Standard Wardrobe Dimensions: Maximum

  • Single: 30x30x62 OD
  • Double: 45x30x62 OD

Standard Wardrobe

  • Hanger bar
  • Vents
  • Casters
  • Carpet interior

Standard Workbox

  • Single: 24x24 OD, 24x30 OD
  • Double: 45x24 OD

Options:

  • Hang Check Hanger Control
  • Casters with brakes
  • Built-in lighting
  • Built-in printers with built-in power
  • Drawers (with and without dividers)
  • Safes
  • Compartments

Ramp Cases

Any C-Style case can have a built-in ramp.  Heavy or delicate equipment that can’t be lifted into a case can be rolled into the case, usually onto a loadspreader to prevent the equipment from sinking into the foam and to secure a properly shock mounted ride.  Every ramp case is unique. 

Standard

  • Plywood: 3/8”, ½” based on touring conditions and payload
  • Laminate Colors: black, blue, white, red, orange, white, gray, and many others
  • Laminates: ABS, Rhino Hyde, Fiberglass

Options

  • Casters with brakes
  • Casters 3.5”, 4x2”, all terrain
  • Drawers (with and without dividers)
  • Safes
  • Compartments
  • Loadspreaders
  • Ramps

Have a question?

Contact our team of experts for a customized quote.

(800) 735-2625

P.O. Box 23337

3339 Union Pacific Ave,
Los Angeles, CA 90023